Deep Groove Ball Bearings are inseparable
bearings. The inner and outer raceways are in the form of deep grooves. They are mainly used to bear radial loads. However, when the radial clearance of the bearing is increased, it has a certain performance of
Angular Contact Ball Bearings and can withstand radial loads. , Axial combined load. It can also be used to bear pure axial load when the rotation speed is high and it is not suitable to use
Thrust Ball Bearings
1. Open base deep groove ball bearing (as shown in Figure 1)
This type of bearing has no special requirements for installation and sealing, and is widely used in various types of machinery.
2. Z, 2Z type with dust cover on single and double sides (picture 2); single and double sides with noncontact sealing ring RZ, 2RZ type (picture 3);Single and double-sided with contact seal ring RS, 2RS type (as shown in Figure 4)
This type of bearing has been filled with an appropriate amount of grease during manufacture, and does not need to be cleaned and greased during installation. Grease has anti-rust and sealing properties. This type of bearing can be matched with various machinery, especially suitable for the environment with poor environment and the need for the bearing itself to have a sealing function.
