The 42200-TBA-A01 is a wheel bearing unit suitable for the rear wheels of the Honda Civic. The following are the key parameter information:
Basic Information
Part Number (OE): 42200-TBA-A01
Compatible Models: Primarily applicable to the rear wheels of 2016–2021 Honda Civics (FC1/FC7/FK7, etc.)
Common Aliases/Related Models: HUB494T, HDB HUB494T
Main Technical Parameters (Based on industry standards and supplier descriptions)
Inner Diameter: Approx. 35 mm (Some suppliers specify 35 mm, applicable to standard journals)
Outer Diameter: Approx. 65 mm (Commonly found in rear wheel hub bearing outer ring size)
Height/Thickness: Approx. 95 mm (Overall mounting height)
Material: Typically made of bearing steel (such as GCr15) to ensure wear resistance and load-bearing capacity
Sealing Structure: Standard double-sided rubber seals prevent dust and moisture intrusion and retain grease. Installation Method: Press-fit type. A special tool is required to press it into the wheel hub or steering knuckle to avoid eccentricity or deformation.
Installation and Usage Precautions:
Before installation, clean the axle end and bearing housing to prevent impurities from causing premature wear.
After installation, check the wheel hub axial clearance; the standard value is usually 0.05–0.15 mm.
Replace the seals immediately if they show signs of aging, damage, or oil leakage.
